Class C- Our covers will accommodate units up to 102” wide.
Width- up to 102”
Height/Side Wall – up to 104”
Sizes Range from 18’- 46’ in length
covers are in 2’ increments.
Units that range from 18’-40’ have two 96” zippers installed vertically along the side wall. Units that range from 42’-46’ have three 96” zippers installed vertically along the side wall. These zippers provide access to front or rear side doors on the unit.
The cover has elastic in the hem at the front and rear of the cover to snug against the unit. The cover also has an attached buckle and 12’ strap beside each zipper along the side wall. These straps go under the unit, side to side, to secure. Each cover has adjuster straps attached at the front of the unit that can be used to tighten the cover for a snug fit. The straps have a double pull buckle installed to allow the customer to pull each side to tighten. Also included in the package are 4 – 40’ tie-down straps. These straps go over and under the unit. Thread the loose end of the strap through the buckle and tighten.
Accessories Included in Package:
4 – 40’ tie-down straps
RV reinforcement kit
Matching Storage Bag
How to determine the correct size cover for a Class C:
EXAMPLE: Your Motor Home has a wall height of 10’6” listed in the spec sheet, and a length of 20’. We know that our cover accommodates air conditioners, ladders, ETC. On the smaller units the mid wheel height is estimated at 15”, on the larger units the mid wheel height is estimated at 18”. Air conditioners are estimated at 15”.
(Smaller units would be less than 20’, the larger units would be over 20’ – this depends on the unit type).
Take the Spec Sheet Height 126”
Minus the Wheel Height 18”
Minus the Air Conditioner 15” (Note sometimes A/C is not added into the height)
The height of the Unit becomes 93” (This should be indicated under the specs/pictures)
Based on that information you know our cover will work, the Class C has a wall height of 93”
PART # MHC1820P