Travel Trailer Toy Hauler – Our cover will accommodate units up to 102” wide.
Width – 102”
Height/Side Wall – up to 108”
Sizes range from 10’- 40’ in length
covers are in 2’ increments
Units that range from 10’-22’ have two 96” zippers installed vertically along the side wall and two 96” zippers for the back door. Units that range from 24’-40’ have three 96” zippers installed vertically along the side wall and two 96” zippers for the back door. The zippers on the side wall provide access to front or rear side doors on the unit.
The cover has elastic in the hem at the front and rear of the cover to snug against the unit. The cover also has an attached buckle and 12’ strap beside each zipper. These straps go under the unit, side to side, to secure. Each cover has adjuster straps attached at the front of the unit that can be used to tighten the cover for a snug fit. The straps have a double pull buckle installed to allow the customer to pull each side to tighten. Also included in the package are 4 – 40’ tie-down straps. These straps go over and under the unit. Thread the loose end of the strap through the buckle and tighten.
Accessories Included in Package:
4 – 40’ tie-down straps
RV reinforcement kit
Matching Storage Bag
How to determine the correct size cover for a Travel Trailer Toy Hauler:
EXAMPLE: Your Travel Trailer Toy Hauler has a wall height of 10’6” listed in the spec sheet, and a length of 19’8”. Most of the units have the tongue length added into the length. A hint that indicates that the tongue length is included is that the model number will differ from the length listed in the specs. It is important to consider each unit as you apply the cover. If you determine the TH does include the tongue, minus 3’ from the length to apply the cover. We know that our cover accommodates air conditioners, ladders, ETC. On the smaller units the mid wheel height is estimated at 15”, on the larger units the mid wheel height is estimated at 18”. Air conditioners are estimated at 15”.
(Smaller units would be less than 20’, the larger units would be over 20’ – this depends on the unit type).
Take the Spec Sheet Height 126” Minus the Wheel Height 15”
Minus the Air Conditioner 15” (Note sometimes A/C is not added into the height)
The height of the Unit becomes 96” (This should be indicated under the specs/pictures)
Based on that information you know our cover will work, the toy hauler has a wall height of 108”
PART # TH1820P